G3/4 Sprinkler Timer - IP65 Waterproof Digital Irrigation Controller with Large LCD Display & Copper Adapter | Automatic Lawn & Garden Watering System for Outdoor Use

Specification: Tap Connection: G3/4 Female Thread Outlet: G3/4 Male Thread Applicable Water Pressure: 1-8kg/2.2-17.6lb Working Flow: 500-1700L/h Working Pressure: 0.2-0.8MPa Setup Steps： 1、For the first time, press "ESC, off" to enter "time" to set the current time, press "Up" or "Down" to set the hour, press "setup, OK" and then press "Up" or "Down" to set the minute, and then press "setup, OK" once to end the setting. 2、Automatically enter "start" to set the opening time, press "Up" or "Down" to set the hour, press "setup, OK" and then press "Up" or "Down" to set the minute, and then press "setup, OK" again to end the setting. 3、Automatically enter "how long" to set the watering duration, ranging from 1 minute to 599 minutes, the maximum is 9 hours and 59 minutes. Press "Up" or "Down" to set, and press "setup, OK" once to end the setting. 4、Automatically enter "how of ten" to set the watering frequency, with an interval of 1-30 days, press "Up" or "Down" to set, and press "setup, OK" once to end the setting. 5、If manual temporary watering is required, press "manual" and then press "Up" or "Down" to set the watering duration, and press "setup, OK" once to complete the setting. To stop watering manually, press "ESC, off" to start the automatic mode. 6、When there is no setting on the full screen (relevant setting items do not flash), press "Up" or "Down" to view the four timing programs from "P1" to "P4"; press "setup, OK" at any time to set the timing. 7、All setting interfaces automatically complete the setting after 8 seconds Package List: 1 x Sprinkler Timer (Battery Not Included) 1 x G3/4 to G1/2 Copper Adapter